1 / 3
Tamiya TT-02 Achsschenkel hinten || Rear Hub — zdjęcie 1
1 / 3

Tamiya TT-02 Achsschenkel hinten || Rear Hub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Verschiednene Spurwinkel || Various track angles

Ocena
0 / 5
Polubienia
53
Pobrania
464
Wydruki
0
Wyświetlenia
1437
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Verschiedene Spurwinkel

Pfeile innen geben die Fahrtrichtung an.
High- und Low-Kompatibel (die Teile können wie von Tamiya vorgesehen für eine hohe und eine tiefe Fahrhöhe verbaut werden).

Es ist zu beachten das die Winkel immer vom Fahrzeugheck lesbar sind für eine positive Spur.

“L” steht für Low
“H” steht für High

Beim Umbau von Low zu High wird das rechte Bauteil zum linken bauteil und umgekehrt.

Neue Version “CVD” mit größerem Innendurchmesser.

Tipps zum Drucken:

Ich drucke die Teile mit der äusseren Lagerstelle ausgerichtet aufs Druckbett. Dann wird nur im Äusseren Lagersitz Support benötigt und der Rest komplett ohne Support.

 

Die Winkel bezeichnen den Gesamtspurwinkel, nicht den Winkel pro Seite!

Various track angles

Arrows on the inside indicate the direction of travel.
High- and low-compatible (the parts can be installed as intended by Tamiya for a high and a low ride height).

Please note that the angles are always readable from the rear of the vehicle for a positive track.

"L" stands for Low
"H" stands for high

When converting from low to high, the right-hand component becomes the left-hand component and vice versa.

New "CVD" version with increased inner diameter.

Tips for printing:

I print the parts with the outer bearing position aligned on the print bed. Support is then only required in the outer bearing seat and the rest completely without support.

 

The angles indicate the total track angle, not the angle per side!

Tagi