Original Ender 3 Y motor extender for 42-40 motor (old extruder motor)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After upgrading to direct drive my 42-40 step motor was laying around. I wanted to use it do drive my Y axis on my klipp
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After upgrading to direct drive my 42-40 step motor was laying around. I wanted to use it do drive my Y axis on my klipper ender 3. So, I desgin this mout using the original mount specs and adding clearance for the bed. Also design a cover to give it more strenght.
Printed on my CR10-SE with Dynalab PETG.
You will need some parts to upgrade the motor:
1) The screws and t-nuts from the current Y mount and the endstop.
2) M3 heat inserts
3) M3x8 screws for the steper motor and cover, you can use the ones you already have in the original mount.
4) 1 meter belt to replace the current one (the old will not fit).
5) Zip ties to lock the new belt to the table.
6) Screw and t-nut to mount the endstop.