1 / 3
NiSi SWIFT-ized adapter ring — zdjęcie 1
1 / 3

NiSi SWIFT-ized adapter ring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter ring to convert all ø82mm filters into the same diameter NiSi SWIFT system.For other filter diameters

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

全てのφ82mmフィルターを同径のNiSi SWIFTシステム化するアダプターリングです。

フィラメントによってホールド感が多少異なるので、印刷物を軽く紙やすりで削るかFusion、STEPデータもアップロードしているので、モデルで調整してください。

他のフィルター径は下記ねじ規格を参考にフィーチャーを調整してみてください。 https://kikakurui.com/b7/B7111-2019-01.html

積層ピッチは必ず0.08mm以下として、画像の向きのようにネジ側がプラットフォーム側となるようにモデルを置いて、サポートなしで印刷してください。

This is an adapter ring to convert all ø82mm filters into the same diameter NiSi SWIFT system.

Since the hold feeling varies slightly depending on the filament, please lightly sandpaper the printed material or adjust it with the model since Fusion and STEP data are also uploaded.

For other filter diameters, please refer to the following screw standards and adjust the features. https://kikakurui.com/b7/B7111-2019-01.html

The stacking pitch should always be 0.08mm or less. Please place the model so that the screw side is the platform side as shown in the orientation of the image, and print without support.

Custom Section

Category: Camera

Tagi