1 / 2
Compliant print-in-place Isopod / woodlouse / roly-poly toy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
~100mm long, ~80mm wide model, uses a 3d printed spring down the middle that allows it to be foldable and bouncy.
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 1123
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
After printing is complete, separate body segments from each other and fold legs down.
I have printed a couple dozen of these, but have no pictures of a fully intact one, as they are very fragile, especially the legs.
I recommend printing these pretty slowly, as to avoid knocking over the thin bits that make up the middle of the shell.