Triangular LED Strip Now Playing Record Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Record stand designed to use metal rods for back support and an light strip to both illuminate the text and the record.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a record stand I created with a few special features. It is designed to use two metal 4mm rods inserted in the back for stronger support. It is also designed to hold a small light strip inside the front to illuminate both the "Now Playing" sign and the record cover it's displaying with a spotlight effect.
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 5M
Rafts:
No
Supports:
No
Infill:
35
Notes:
Recommendations
No supports are necessary.4mm x 200mm metal rods are what I use for the back supports, they should fit snugly with a little bit of force. I also use rubber tips on the top because the rods I purchased were a little jagged on the ends. Technically you could also print the rods but of course metal would be stronger. If there are requests I will create an STL for printable rods.
Add more walls and infill to make it stronger. There is enough space to stack a bunch of records but the weak point is where pillars meet the bottom of the stand, especially if there are a lot of records leaning against it.
Print in a semi translucent color, otherwise the light will not pass through the letters. However the spotlight in the back will work either way.
I use light fuzzy walls settings to avoid layer lines.
Category: Music