one hour BLADE - Utility Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Every maker needs a simple utility knife to be printed in less than an hour for trapezoidal blade.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 213
- Wydruki
- 3
- Wyświetlenia
- 1957
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
one hour BLADE
It's a tool that every maker needs. How many times you have taken a knife from your kitchen?
There are many version online for handling trapezoidal blade, but they too many complex and have many tolerance to pay attention. I have designed a simple version and it is designed to be printed fast.
It take only 22 minutes to print with a 0.6 mm nozzle, but I guess it can take less than one hour with a 0.4 mm nozzle too. No, I'm sure. Gcode for 0.4 mm nozzle is posted.
There are two version of the print. One has 4.25 mm holes where you can fit M3 threaded inserts and one with 3 mm holes where you can use only the screws. You can't use the 4.25 mm holes version using M4 screw because the blade won't fit.
BOM - one hour BLADE
3x M3x6 Button head screws (cap head will fit too)
3x M3x5.7 Threaded inserts
1x Trapezoidal blade
BOM - one hour BLADE without threaded inserts
3x M3x6 Button head screws (cap head will fit too)
1x Trapezoidal blade
Hope you enjoy!