SV06/plus Portable usb adxl mount remix fysetc portable usb-c
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from Bassamanators adxl mount, made to suit the fysetc portable usb-c adxl
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I edited the original Bassamanator model to accomodate Fysetc portable usb input shaper. As I only have one sensor the original model makes it easy to measure both x and y axels, however it did not allow to mount the portable sensor.
I prefer heat inserts so model at this point only for those. For the sensor mounts use m3x4x5 inserts and M3x6 screws.
Also to make the sensor work, there was some testing and setting up in the cfg. For my working settings for this sensor I also attached a screencap from my adxl.cfg.