Slotted base for the Raspberry Pi/DIY-based IoT kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place the slotted base on top of a rack and then place the IoT kit into the base, as shown in the picture above.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
Place the slotted base on top of a rack and then place the IoT kit into the base, as shown in the picture above. The base will prevent the IoT kit from falling over.
The IoT kit can be used with the hydroponic planters I designed, store data in the cloud, and send data summaries and alert emails.
- Frames for Raspberry Pi/DIY-based IoT kits
- hydroponic planters
The slots on the back of the base are 3 cm apart and 2.8 mm thick. They will fit over a standard rack.
You can learn how to use it in detail in the Udemy course below:
Print settings
Adhesion assistants: for accurate printing of the slots, a brim or raft is recommended.
About us
My name is Kensuke and I live in Tokyo. I like designing, gardening, spearfishing, and cooking. I am happy if you print my design.