Slotted base for tripods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Placed the slotted base on a rack and then place the tripods into the base, as shown in the picture above.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
Placed the slotted base on top of a rack and then place the tripods into the base, as shown in the picture above. The base will prevent tripods from falling over.
The slots on the back of the base are 3 cm apart and 2.8 mm thick. They will fit over a standard rack.
The tripod with a webcam in the picture can be used with the IoT kit in the link below. The kit also can be used with the hydroponic planters I have designed, store data in the cloud, and send data summaries and alert emails.
- webcam mount
- Frames for Raspberry Pi/DIY-based IoT kits
- hydroponic planters
You can learn how to use it in detail in the Udemy course below:
===
Print settings
Adhesion assistants: for accurate printing of the slots, a brim or raft is recommended.
About us
My name is Kensuke and I live in Tokyo. I like designing, gardening, spearfishing, and cooking. I am happy if you print my design.