1 / 3
SMA Jack Adapter for Deenlai FSH710 IP66 Junction Box — zdjęcie 1
1 / 3

SMA Jack Adapter for Deenlai FSH710 IP66 Junction Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SMA Jack Adapter for the Deenlai FSH710 junction box that re-uses one of the supplied rubber O-rings and PG9 nuts

Ocena
0 / 5
Polubienia
17
Pobrania
49
Wydruki
0
Wyświetlenia
528
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

SMA Jack Adapter for the Deenlai FSH710 junction box that re-uses one of the supplied rubber O-rings and PG9 nuts.

Should work with other PG9 thread junction box holes and glands too.

Print with supports for the recessed M6 nut hole (unless your slicer can bridge them successfully).

Updates:

  • 2024-05-05: Slim down inside lip from 1.6mm to 0.8mm and reduce thread length to be flush with nut

Category: Electronics

Tagi