Detail sanding block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple sanding block for detail work. Easy colour coding for different paper grits.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 718
- Wydruki
- 9
- Wyświetlenia
- 3458
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Simple sanding block for detail work. Colour coding for different paper grits.
Sandpaper length required is 23cm, which is short side of standard sandpaper sheet.
Print and assembly instructions
Print with PLA. For recommended settings and print orientation, see 3mf file.
Holding screw is held directly in PLA, which proved to be simple and durable enough for this application.
Required hardware is M4x15mm flathead bolt and M4 hex nut to use headcap, or any M4x8mm bolt without headcap.
Headcap has intentionally 0.2mm layer over hole to ease printing. Simply cut it out or drill it before assembly.
Like this model?
Check out my other creations here: https://www.printables.com/social/33126-zbynek-ch/models
Support me
If you like this design and want to support me, you can buy me a coffee: https://ko-fi.com/zbynekch