Rooster doorstop with/without handle (rooster statue)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created from a 3d Scan of a antique cast iron Provencal door stop.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Door stop with handle is in two parts that can be aligned on it's origin like a multicolor print.
Test printed with pla at ¼ scale,
P.S. Connecting base to handle is up to you! Original used a 2 way screw ( holes need to be drilled) , parts can be printed together or also glued.
The original was made of 2 cast iron shell, heavier than plastic , so a good amount of weight should probably be added to fulfill it's original purpose. (I did not experiment this and take no responsability in result)
If you go for a screw do not forget to have enough wall and infill tickness for it to work properly. The file could also be modified with holes that fit the hardware you got.