Neptune 2 Dragon Burner mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for using the Dragon Burner toolhead on the Neptune 2 backplate
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Description
This is a simple mount for using the Dragon Burner toolhead on the Neptune 2 series of printers. This has only been tested on a 2S but should work on at least the regular 2. The model is build with 0.6 nozzle/tolerances in mind but should print ok a 0.4 nozzle as well. Full description to be fleshed out further in the future.
Parts Used
Dragon Burner (obvs): https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
MK8 Hotend Mount: https://www.printables.com/model/774630-dragonburner-mk8-hotend-mount
BMG/Clone mount: https://www.printables.com/model/671082-dragon-burner-v8-a-bmg-extruder-beta - NOTE: You will loose X, Y, and Z, and you won't be able to hit the X endstop with this!
Print Details
I printed this in Eryone CF-PETG for the extra regidity and sleek look. PETG at a min is what I'd recommend, ideally CF or moving up to ABS/ASA as recommended by the Dragon Burner team. Use Voron spec for the walls and infill.
The model uses sacrificial bridges on some of the holes, use a screw to punch through these.