1 / 1
Sonos one speaker support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part to increase height of the sonos one by 155mm.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
My sonos one rear speakers was just too low placed, so i made some sonos sub inspired supports to raise them by 155mm.
The supports have tabs that locks into the bottom of the speaker, and cutouts so power wire run thru the support.