1 / 8
FGC9, FGC6, FGC68 -MKII UNW Pressure pad mod pack — zdjęcie 1
1 / 8

FGC9, FGC6, FGC68 -MKII UNW Pressure pad mod pack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

on a later date will I make a version of this grip type that doesn’t need to be modded like this.. but for those how…

Ocena
0 / 5
Polubienia
4
Pobrania
62
Wydruki
0
Wyświetlenia
648
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

on a later date will I make a version of this grip type that doesn’t need to be modded like this..

but for those how don’t feel like reprinting the entire shroud like I did haha…
is here a update kit. it’s a bit of work but is should not be that hard to do.

for the grip panels it self look at the instruction pictures.

the wire clipper can be clipped on the small rail section. but I’m aware that I kinda forgot to include that small rail section in a lot of the MKII shroud designs that I made…

so there is also a version that van be screwed in the shroud it self.. how ever is this smart? I think that better to just do with the FGC6 and FGC68 line up. or use small screws..

so if you have not printed the ones with the grip and like this set up then just wait for a view weeks until I got the one made that doesn’t need al this work to use this set up.

side note: the grip panels it self will work on all my grip’s from MKI to MKII unless your looking at the later model that can already use the pressure pad.

but the cable clip will most likely have a limited use and is designed for LB shrouds and UNW short shrouds

Category: Sport & Outdoors

Tagi