Pursament sample spool adaptor reuse idea
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you buy Prusament filament? Do you buy samples? Do you have nowhere to put your samples?
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 135
- Wydruki
- 2
- Wyświetlenia
- 1747
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Do you buy Prusament filament?
Do you buy samples?
Do you have nowhere to put your samples?
Then rejoice the solution is here
Prusament comes on a 3 part spool with 2 sides and a cardboard central tube
See more here
https://www.prusaprinters.org/prusament-spools-reuse-ideas/
if you are careful you can pull the spool apart to give you two sides
If you then print this then you can press it onto one of the sides to give you a smaller sample spool holder
NOTE
The model shown in the pictures has a honeycomb pattern on the side
This is done by switching off the top and bottom layers while turning the perimeters up to 5
UPDATE
I have added version 1.2 which has a bigger chamfer and a hole for the end of the filament
And a Fusion 360 design here https://a360.co/2UE7f4Y
Print instructions
The model shown in the pictures has a honeycomb pattern on the side
This is done by switching off the top and bottom layers while turning the perimeters up to 5