STIHL HSA 26 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount for STIHL HSA26
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 173
- Wydruki
- 2
- Wyświetlenia
- 1165
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
STIHL HSA 26 – Wall Mount
A simple and practical wall mount for the STIHL HSA 26 cordless garden shears.
Keep your HSA 26 securely stored, easily accessible, and neatly organized in your garage, workshop, or garden shed.
🖨 Printing Instructions
No supports required
Material: Tested with ASA, which works great. PETG should also be suitable.
PLA is not recommended, especially in environments exposed to higher temperatures.
⚠ Important: Print Orientation
Always print the parts in the orientation provided in the STL files!
The thin support arms must be printed in this orientation to ensure sufficient strength. Changing the orientation may cause the arms to break along the layer lines under load.
📐 Available Versions
Two versions of Part 2 are included:
Standard: For regular wall mounting.
+22 mm: Extended by 22 mm to accommodate installations where the upper part is mounted on a 22 mm thick board.
I use the extended version for my own setup.
🔗 Matching Blade Holder
I’ve also designed a separate wall mount for the second blade:
👉 STIHL HSA 26 – Blade Wall Mount & Cover
⭐ Feedback
If you like this design, please leave a rating or share a photo of your make!