1 / 4
FGC-68 to FGC6 shroud adapter — zdjęcie 1
1 / 4

FGC-68 to FGC6 shroud adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

in the rare case you like to convert a FGC68 shroud (MKI or MKII) into a FGC6 shroud. then you can use this adapter…

Ocena
0 / 5
Polubienia
1
Pobrania
25
Wydruki
0
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

in the rare case you like to convert a FGC68 shroud (MKI or MKII) into a FGC6 shroud.
then you can use this adapter for it. this will make the hole smaller again so the barrel nut for the airsoft barrel can fit inside of it again.

there is a model for the MKI and for the MKII those can’t be mixed!

the MKII got 2 models a big and a small one. the small one can be used on all FGC68MKII shrouds. but the big one only on the later model that were specially made for the MKII the main difference can be spotted when looking at were the 4 bolts go on the later models this have been made wider then I used to do it on the MKI models.

also a important note! this adapter kit is not for the FGC68TMC models! or FGC6GG! those work different

use 4x m3 bolts that are 35mm long

movie link:
https://odysee.com/@UntangleWORKS:a/UNW-68-to-6-adpater:c

Category: Sport & Outdoors

Tagi