Fuji X mount to C mount focus to infinite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for fitting C mount lenses for example CCTV lenses to Fuji X mount cameras.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter for fitting C mount lenses for example CCTV lenses to Fuji X mount cameras. Can focus to infinite. Print quality should be 0.12mm for infinite focus and best fitting. Supports are required. PLEASE clean the print thoroughly with a lighter for any stringing. Your sensor is way more important than a piece of plastic.
The first fit can be rough and noisy but it will fit perfectly after 2-3 use. Also removing the adapter from the camera can be hard it feels stuck but it should be fixed after 2-3 use also.
If not focus to infinite just cut a small piece of paper and place it between the lens and adapter as seen on foto. Most of the papers are 0.10mm thick, this should be enough. If not just put another piece of paper on top of it and adjust the tightening of the screw mount.