Bambu Lab X1 / P1 / X1C Riser with Storage Drawers, Build Plate Holders, and poop drawer

I needed storage for my X1C. I also didn't like having the poop bucket behind it. This build directs the poop into a large drawer. There are also 2 other drawers with a tray and dedicated space for your hot ends.

The recommended way to print this is:
- PETG or ABS
- Layer height: 0.2mm
- Infill: 10%
- Wall loops: 3
- Top shell layers: 3
- Bottom shell layers: 3

You will also need the following materials list:
- M4x12mm Screws (60) - https://www.amazon.com/Yudesun-Fasteners-Tools-Nails-Screws/dp/B07SPWW166/ref=sr_1_3?th=1
- 8x2mm Magnets (18) - https://www.amazon.com/TRYMAG-Magnets-Neodymium-Whiteboard-Hobbies/dp/B0CDH2HCV9

Assembly videos:  Part 1 and Part 2

There are letters and numbers on most of the pieces and those will face up, towards the printer when finished.  Glue is not required, but if you want a stronger hold then feel free!  You also may want to consider some sort of foam or rubber strip to put between the machine and the drawer system to prevent vibration-related issues.

Origin Attribution:
This is a remix of the original file created and posted on MakerWorld by user @emazzarol under the Attribution-NonCommercial-ShareAlike license, however after incorporating extensive testing and feedback from the community into the file, he took the page down. I do not claim any ownership of this file or any part in its original development, however there were many contributions taken from the comments, ratings and remixes on the Maker World sites, that were used to create this file. For those reasons, I have decided to post my personal remix of that file to support the 3D printing community. These licensing rules that we all must live by ensure that we maintain the community that we have here.