Pegboard Basket, Large - 1/8" holes x 1" spacing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large basket for my pegboard. Great for hanging/organizing general small stuff that doesn't need its own hanger.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 326
- Wydruki
- 1
- Wyświetlenia
- 862
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Designed in TinkerCAD to mount on 1/8" (4mm) holes x 1" (25.4mm) spacing pegboard.
There are two versions. The attached photos show version 1.0. Version 2.0 has a bit more support on the back.
I print with supports but only to support the peg board hooks using a support overhang angle of 75°. If you set the support overhang angle too low you'll get supports for every single hexagon cutout which isn't needed. If your printer and settings are good enough, you might be able to do away with the supports.
My models are not to be shared on any 3D Model website that requires the user to create and use an account to access models. I.E. the model is NEVER to be shared on sites such as Cults3D or similar.