Transformers MP-52 Starscream Stand Adapter Replacements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand adapters for MP-52 seekers for jet and robot modes.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement stand adapter for the jet mode of MP-52 Starscream. My personal copy cracked after using it a few times and I decided to replace it with something a little better.
The 3d printed stand adapter has been shifted backwards to balance the weight better. This I believe was the main reason why the included clear plastic one cracked in the first place.
Included in this file set is an adapter for the robot mode as well, however this is untested and there is an existing robot mode stand adapter here: https://www.thingiverse.com/thing:4906090 If you do wish to test this, please let me know how well it works and if I need to tweak it.
6/7/2024 - Updated the robot mode stand adapter. This adapter is purely gravity stabilized. The MP-52 mold requires a stable friction fit for tilt to work, so use the thingiverse file I linked if you want more dynamic poses. Otherwise v1.1 will work fine for a neutral flying pose.