RG351V Extended Back Comfy Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This comfy grip was redesigned with a hollow back bump out for attaching a Teensy between grip and unit for Headless M8.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed with an extended back section to accommodate a USB attachment. The deep back is even more comfortable than the OG for me to hold and balance with a light grasp which puts less strain on the hands. This is very helpful if you have hand or wrist sensitivities due to repetitive motion like I do. YMMV, but you might like this grip even if you're not attaching anything to the RG351V.
The back section of this grip allows you to discretely and safely attach a Teensy board to run Dirtywave M8 Headless on your RG351V. (See ‘Differences’ section below for how to attach the Teensy).
The back bump out allows the unit to sit flat on its back with the grips on.
The deep model is 1mm deeper on the bump out than the other model. The deep model is pictured in the photographs.
Print with the flat edge down and handles sticking up in the air.