Nest Protect v2 Mount Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I noticed the non-battery powered nest protect v2 can only be placed on the “power-box” in the ceiling.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 304
- Wydruki
- 1
- Wyświetlenia
- 1726
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I noticed the non-battery powered nest protect v2 can only be placed on the “power-box” in the ceiling.
Since I could print one, I searched for a suitable 3D printed mount. But sadly didn’t find anything to my liking. Most of them are to high and bulky.
So I designed my own. Goal was a sturdy but mostly hidden mount.
You can use 4 screws, 2 should be enough.
I printed two, mounted both with the two outer holes. Works like a charm!
Print instructions
Category: Household Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 5%
Notes:
Print in ABS, 5% infill, 3 perimeters, 5 top layers, 3 bottom
Using slic3er? Disable 'ensure vertical shell thickness'. Not needed for this print, faster print en less stress on your bearings.