1 / 3
Poop bags holder for your neighborhood
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poop bags holder for your neighborhood that can be refilled by anyone
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The model is designed to hold up to three rolls of bags that can be easily refilled by adding them from the top.
BGCode for MK4IS prints two parts that need to be glued together printed from PLA. As seen in the picture, a separate label model in Polish is intended to be glued in front - it's extremely simple, so I recommend doing your own label: 75mm x 65mm x 1mm.