FGC6 V24 suppressor outer barrel set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
new V24 outer barrel set
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
18-5-2024
there is a small end front cap added for the P9 suppressor for short P6 SD shrouds
________
to be clear this are not made to be functional pieces, just to hide the inner barrel of your airsoft replica.
with that said this new V24 version does make it possible to hide a tracer unit in most of the suppressor models supported by this new out barrel.
the mounts for this are in a separate set that can be bought here.
https://cults3d.com/en/3d-model/various/tracer-mounts-add-on-set-for-the-fgc6-v24-suppressor-outer-barrel-set
I have chosen to go of spec on this mount so it could optimize it for 3d printing. by giving it bigger threads then the 14mm CCW.
my advise is to first assemble the parts before you place in a tracer or mount it on your replica. and making small back and forward screwing motions on the threaded parts this will help to smooth out the threads with out getting to much friction, and make it stuck in place..
also keep in mind only a limited line up of shrouds will work with this set so take a close look at the pictures of what models work.