Doppelzahnrad 100-127 für Bernardo P600G, Double gear for Bernardo P600G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doppelzahnrad für zöllige Gewindesteigungen. Double gear for imperial threads
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Doppel-Zahnrad mit 100-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind auch die Steigungen 4, 5, 10 und 25 Gänge pro Zoll möglich. Hebelstellungen siehe Tabelle.
Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.
Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig
Achtung: Für einen paßgenauen Sitz muß die 14mm Bohrung mit einer 14 H7 Reibahle auf genaues Maß gebracht werden!!
Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch wirklich an den anderen genannten Drehmaschinen paßt.
……………………..
Double gear with 100-127 teeth for driving the feed gear on the Bernardo P600G lathe for cutting inch thread pitches. With this double gear instead of the original 120-127, pitches of 4, 5, 10 and 25 threads per inch are also possible. See table for lever positions.
Should also fit identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.
Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Stitching position: random
Attention: For a precise fit, the 14mm hole must be brought to the exact size with a 14 H7 reamer!!
If someone prints it and uses it, please let us know whether it really fits on the other lathes mentioned.