1 / 5
S2 Hinge filler plate (SKG)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filler plate to adjust doorhinges from brand S2. Different thicknesses available.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (3)Powiązane
Filler plate to adjust doorhinges from brand S2. Different thicknesses available.
The plates are used behind the hinges to adjust the doors to be vertical again / aligned with the frame.
If you need a custom size, use the 1mm thickness and scale the Z in your slicer.
Print with alot of infill, they will be squeezed if there is air inside.
updated 2024-06-11
Added closed plates for if you take out the screws and want to fill the whole plate.