Mirror Shim for Triumph Motorcycles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is designed to fix faulty ball joints in late model OEM Triumph motorcycle mirrors
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A common failure point in the OEM mirrors on late model Triumph motorcycles seems to be the ball joint retaining collar inside the mirror housing. A moderate bump to the mirror can crack the collar and cause the ball joint to lose tension.
This part is a shim that forces the broken retaining collar back into service. It was designed to fit Triumph part T2060314 but will likely fit other Triumph OE parts that share the same ball joint pivot which is common across the brand from at least the mid-2010's.
Print at 100% infill and 4+ perimeters. The shim will be subject to constant tension and likely high temperatures in the sun. PLA or other materials with low glass transition temperatures and high likelihood of plastic creep are not recommended. For long-term resilience use polycarbonate, ABS, or CF-reinforced PETG.
Repair information and procedure in pictures:
The mirror glass is held in by silicone adhesive from the factory. Use a heat gun or oven to heat the mirror to 160-200F (71-93C) then use plastic prying tools to carefully remove the glass. I suggest iFixIt Opening Tools.
A broken retaining collar from the outside:
Broken collar from the inside. The broken pieces work their way into the gap between the housing and the metal plate. The shim fills in this gap:
Broken piece back in service:
When complete, reinstall the glass with a similar silicone adhesive or 3M VHB tape.