1 / 3
Piano key hook — zdjęcie 1
1 / 3

Piano key hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The wall hanging hook with black and white piano keys, optimized for 3D printing,

Ocena
0 / 5
Polubienia
10
Pobrania
43
Wydruki
1
Wyświetlenia
369
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The wall hanging hook with black and white piano keys, optimized for 3D printing, no support and is easy to install

 

Installation Guidelines:
1.All piano keys are arranged according to the diagram

 

2.Slide the piano keys into the corresponding slots and position the black keys properly
Push the black shaft through the circular holes of all keys until the other end also clicks into the base

 

 

3.Installation completed, press the black button at the bottom to pop up the hook

 

 

In order to accommodate most people's printers, I have set the tolerance to 0.2mm. If you feel that the black keys are too loose after installation, you can adjust the outer contour compensation by yourself, or drop glue at the contact area between the white keys and the base according to the picture below.


I hope you like it!


Finally, don't let the printer rest

Tagi