ECM (v1) 30cm Rifling Mandrel-9x19
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
note that there is a V3 version out there... https://odysee.com/@c0ld_d8rk_h8nd:8 this design is taken from a: Rifling…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 1006
- Wydruki
- 0
- Wyświetlenia
- 5124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8
this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file.
this for the use for a 300mm barrel and this can be printed in 1 piece. or in 2 pieces were you can use 2 pieces of 1.75mm filament to make a strong Rifling Mandrel
see the installation picture for more details
in case you like to have a even longer barrel then you could take a look at this remix that have been made of this concept https://cults3d.com/en/3d-model/tool/100mm-9x19mm-rifling-mandrel-extension
Category: Sport & Outdoors