Varia VS3 & Superkop (bottomless) Portafilter Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hoder for superkop portafilter at the Varia VS3 Grinder.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 1801
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
Here I have a Holder for the Superkop portafilter & the Varia VS3 Grinder.
It is made out of 2 Parts and 2 accessories.
A) Holder - Simply click it into place!
B) Tensioner - Tension the holder arms so the system is more stable!
*C) Funnel to keep the workplace clean"er" if there is some static charge messing with the ground coffee.
*D) A plate to catch the leftover crumbs falling out of the grinder.
I always recommend the VS3 with the bean propeller to have them not sticking to the walls :D
https://www.printables.com/model/580741-varia-vs3-coffee-grinder-bean-distributor
Height adjustable
You can adjust the height of the portafilter/ holder. Even after putting the tensioner in place.
Maybe this way even a portafilter with duo outlet fits?
If it doesn't stay in place this way you can add 2 M4 screws to the bottom.
Tensioner
Here you can slide in the tensioner (from the bottom back of the VS3). If it is too tight you can use sth. like a wooden stick to push it in.
Plate
Add the plate to catch leftover ground coffee.
A version for other portafilter is on its way :) So keep updated!
Have fun!