Cannondale SI stem Bottle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this mount is made for a Cannondale Scalpel. So I’m not sure how well this will mount on other Brands or Models from…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
this mount is made for a Cannondale Scalpel. So I’m not sure how well this will mount on other Brands or Models from Cannondale. but most bicycle bottles should fit with his mount. but this hard to say of course.
I do recumbent the use of some sort of rubberised tape to give more grip to the stem mount and where you clamp the bottle so it will not slip out. and this helps dampening sounds and the risk to get scratches.
you will need 2x M5 in 20mm length and 2x m5 brass knurled nuts.
to finish the joint do you need 1x M3 in a 40mm length or 2 in a smaller size.
and 1 sort piece of elastic with a OD of 3.5mm or 4mm
link to the movie: https://youtu.be/u7jKHRwIHV8
Link to other MTB parts: https://www.thingiverse.com/untangle/collections/mtb
Category: Sport & Outdoors