BeamCase - simple radiator bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket can be used to add radiators to your BeamCase at the top, bottom, and front and comes in different sizes.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 1636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This bracket is made to add radiators to your BeamCase (SFF). It comes in different sizes depending on the radiator and fan thickness and mounting position. The bracket is secured to the radiator with standard screws and then it simply screwed to nuts located in the aluminum profiles.
This is a very simple radiator bracket that is just screwed to nuts located in the Makerbeam XL profiles.
Currently this bracket is only compatible with BeamCase SFF (and not BeamCase Sandwich)
This radiator bracket comes in different size for different radiator thicknesses and mounting locations (each bracket has holes for 120mm and 140mm fans).
Ideally the bracket is used to mount the radiator from the inside as, this is the most space saving option.
These brackets are designed to work together with the modular BeamCase ITX case which can be found here.
Required Hardware
Screws:
M3x8mm countersunk screws for the 17mm version (2pcs per bracket)
standard fan screws (come with your fans)
Nuts:
standard M3 nuts (2pcs per bracket)
Print Instructions:
Ideally print this model in a stronger and more temperature resistant filament like PETg or ABS. In order for the bracket to work perfectly it has to be printed accurately, so compensate for shrinkage. This print like all BeamCase parts does not require any supports.
I adjust for ABS shrinkage by scaling the model to 100.5% (Bambu Lab P1S and Sunlu ABS) , but it depends on the filament and printer and print speed.