1 / 10
FlyingBear P902 to ZeroG Mercury One.1 (coreXY) 1.1.6 — zdjęcie 1
1 / 10

FlyingBear P902 to ZeroG Mercury One.1 (coreXY) 1.1.6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified stepper assemblies and front towers for the FlyingBear P902

Ocena
0 / 5
Polubienia
24
Pobrania
139
Wydruki
0
Wyświetlenia
1991
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Stepper assembly (and original X joint) files now updated to the 1.1.6 version!

This is a coreXY mod for the old Flyingbear P902 based on the ZeroG Mercury One.1 (R1.1.5).

Most of the part are the same as the original design and you can find them in the official ZeroG page, the modified parts use the same printing settings as the original as well as the hardware.

You can use the original stepper motors for A/B and Z axis, is recomended to use a smaller stepper motor for the extruder (Im using nema 17 x 22mm and a BMG style extruder). Also you can modified the original endstops.

Custom BOM:

  • MGN12H 300mm for Y axis (x2).
  • MGN12H 320mm for X axis (x1).
  • T8 screw 400mm for Z axis (x1 if you are using one z stepper).

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.25 first layer then 0.2

Infill:

40

Filament: Any ABS/ASA

Category: 3D Printer Parts

Tagi