Drink Pouch Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a storage box to hold single-serving drink pouches and packets of True Lime/Lemon/Orange.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a storage container for single-serve drink pouches, along with space for True Lime/Lemon/Orange/etc packets.
This will fit 23mm wide pouches (seems to be the standard size for Crystal Light, Wal-Mart brand, and many others) and 38mm packets (turned on their short side). There's space to fit 10 pouches snugly, and 30-40 packets.
In the picture, there's a little blob of filament - this is not due to the design, the power went out and the print stopped there! I printed it using the “fuzzy skin” mode, but that's down to your preference with your slicer.
Printed using Polyterra PLA, .20mm layer height and 20% infill, no supports needed.
I included two options - one with cutouts to save a bit of filament, and one without cutouts.