Big Agnes tent - anchor point replacement part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a part on Big Agnes tent bedroom, where you place a tent pole and what you anchor to the ground with tent peg.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Friend asked me if I am able to replace his broken part of Big Agnes tent, because there is no service available for this brand here - so I did (at least tried)
Normally it is not replaceable (without ripping and sewing a seam) so I used shortened 2mm nail as peg (and also for higher strength) to connect it with the strap and because I had no longer then 10mm rivet I used that and press fit (it is secured by the cord at least) but proper lenght rivet would be better.
Slightly modified for better strength and “easy to print” shape.
Printed from PETG, 0.3mm layer height, full of perimeters (10) - so it is 100% infill with hopefully best possible strength.