Nexx xcom 2 to V6 intercom adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Nexx X-Com 2 intercom slot on helmet to mount V6 (and probably V4 and similar designs) intercom.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I also added blank "slot cover" for helmet and standalone holder for V6 intercom for possible easy remixes for another helmet or intercom (or anything else :).
Designed by hand measuring as precise as possible and tested on Nexx Vilitur helmet and old V6 Intercom.
Because of small flexible clip I recommend to print it horizontally (as on picture) to avoid snap of it (it can happen some times anyway).
Printed from PLA or PETG, 0.3mm layer height, 20% infill, be sure that flexible clip is full of perimeters.
Latest model with added holder for jack connector to prevent hanging and flapping around in case that intercom is not mounted. And with reinforced flexible clip to hopefully avoid snapping.
Edit: I also made new variant for newer Q8 intercom https://www.printables.com/model/1027428-nexx-xcom-2-to-q8-intercom-adapter