Inventions - Evolutions of Ideas: Idea Card Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tray to hold the Idea card stack for the board game Inventions - Evolution of Ideas. The tray is designed…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tray to hold the Idea card stack for the board game Inventions - Evolution of Ideas. The tray is designed for sleeved cards.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.8 mm Nozzle; 0.2 mm Layer Height
Infill:
20%
Filament: eSun; Ender; Amolen PLA+; PLA Brown, Yellow, Light Brown; White; Silk Silver
Notes:
The tray was printed with four filament swaps to create the pattern at the bottom of the tray.
The tray was designed in Fusion 360 and exported as an .STL file through MeshMixer. The "Inventions" logo on the underside came from a screenshot of the downloadable "Upgrade Cover Sheet V6" PDF. The image was edited and converted into black and white with GIMP, transformed to an .SVG file using Inkscape, and imported into Fusion 360 for extrusion. The light bulb design on the bottom of the tray was obtained by taking a picture of the Idea Display Board in the Upgrade pack, and then using Gimp and Inkscape to create an .SVG file for extrusion.
Category: Games