FormFutura ReFill Flange Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The current flanges can be connected with tie wraps but this printable solution is more reliable and easy to use
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 413
- Wydruki
- 5
- Wyświetlenia
- 1427
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Introduction:
ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum.
Find out more about FormFutura ReFill: https://formfutura.com/product/refill-pla/
Do you want to support FormFutura, or cannot print this model? You can also purchase them at our Store!
Solution
The current flanges can be connected with tie wraps but this printable solution is more reliable and easy to use. Because you can swap and secure your flanges more easily and way faster.
Why would I secure the flanges?
When the flange comes loose your filament can fall off your spool resulting in a mess.
Important
This system works for both 200mm and 245mm flanges but for the 245mm (2KG+) you need to print out the extra spacer called “Flange in place holder -middle 1”
Video Instruction:
Find Out More About FormFutura: https://formfutura.com/