FF Adv 5M Pro Tool Holder Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool and glue holders designed to hook onto the top of a Flashforge Adventurer 5M Pro with integrated lid prop.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 512
- Wydruki
- 3
- Wyświetlenia
- 2346
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a tool holder that included dedicated spots for commonly used tools. All models are designed to be printed without supports and in the orientation given for maximum strength.
Tool Holder -
The tool holder is printable without supports. Holes are slightly oversized to prevent tools from binding. Holds the following tools:
- Flush cutters
- Small needle nose plyers or cutical nippers
- 3 allen keys (provided with ADV5MP)
- Phillips (provided with ADV5MP)
- 3/16 flat head screw driver
- Deburring Tool
- Small Wire Brush
- Nozzel De-clogging Pin
Hanger Blank -
Standard hanger with no modifications for proping the lid.
Hanger With Finger (Left and Right) -
Added mount for the Lid Finger to the top of the hanger to prop the top lid of the AD5MP when needing to vent excess heat from the build chamber. Adjust the mount the lid is open by moving the hanger toward the front or back of the machine.
Lid Finger (Left and Right) -
Left and right lid finger corrisponds to the left and right “Hanger with finger” files.
Lid Finger Pin-
Finger pin is identical for both left and right orientations fo the hanger.
3DLAC Spray Holder -
Designed to fit the 400ml (13.52 fl.oz.) spray cans of 3DLAC bed adhesive.
Roll On Holder -
Designed to fit the roll on bed adhesive supplied with the ADV5MP. Can also be used as a miscelaneous tool holder.
Storage Box -
Just an open box for miscelanous storage.
Spool Holder Horn -
Horn that fits the “Spool Holder Back” extension peice.
Spool Holder Back -
Extends the hook to hold the spool lower. Also hoold the “Spool Holder Horn”
Nozzle Holder -
Posted Separately due to it can be used for the 5m. It also can be mounted with command strips.
Link to nozzel holder: https://www.printables.com/model/886298-ff-adv-5m-pro-nozzel-holder
If you would like to help me keep up the good work and make a donation: https://ko-fi.com/kyleplansinis