Athlon Cronus GenII Parallax Adjusting Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parallax adjusting knob fitted to Athlon Cronus GenII rifle scopes
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parallax adjustment wheel for an Athlon Cronus GenII rifle scope. It has an outer lip that stops how far it can be pushed onto the turret. This leaves the yardage numbers easily seen. Mounting is sized for an m3 screw and nut. The inner diameter is about 34.5mm The
The numbers on the wheel, as shown in photo, are removed. I made a trial adjustment wheel for my son and he advised me that while the knob fit, the Athlon turret turned only a about a quarter turn and that the numbers also ran the wrong way, as I originally remixed this to fit my Vortex Venom. Deciding the numbers were of little use, I removed them in my final version.
I will entertain comments, requests, or suggestions. Cheers!