Tragegriff / Ergonomic Screw-on Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw-on handle for carrying stuff (in my Case an Xtool M1 Lasercutter which had no handles at all)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Needed 2 relatively low profile handles to carry my bulky M1 Lasercutter around.
Bolted on with 4 M4 Screws.
Printed in PETG (sideways - so the print perimeters strengthen the handle) with 0.2mm layer height, 100% infill and 12 perimeters.
I used organic supports for the screw holes and inside the handle (see pictures) - but I was overly cautious because I needed the parts to hold up directly. Maybe also works without supports at all. (needs try out).
Holds the weight of my bulky machine box very well - and is quite comfortable.
Enjoy!