Pocket Protector for Medecins Sans Frontieres
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,34 € – 0,42 € netto (bez VAT)
Dla pliku: Pocket Protector FINAL_MSF_Panel_with_Logo_COLOR-WBR_28m_0.20mm_205C_PLA_ENDER3V2.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,38 € netto (środek widełek).
- Masa podana przez autora
- 3 g
- Czas druku podany przez autora
- 27,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A pocket protector for use in a lab coat. Contains MSF logo.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
This pocket protector is designed for use in a lab coat, where small objects like pens and screwdrivers can fall out of a pocket causing contamination of the workspace or damage to equipment. Or, items in the pocket can poke holes or leak onto the lab coat itself. It is sturdy and emblazoned with the sponsor's logo (optional).
There are two sizes of pocket included. The tall one is intended for lab coats which have larger pockets at 120mm high. The short one is intended for regular shirt pockets at 100mm high. The pocket is 90mm wide and 15mm thick.
The logo has been slightly re-arranged to make the text larger and clearer.
Print the pocket as it is in the STL, with opening down. For the logo panel, it has to be printed rotated 90 degrees on X axis with text up, so that color changes can be made when printing the logo. To match the color scheme, start with white, switch to black at the layer after the last solid one, and then to red after the last of the text.
I printed with PLA+ filament for a little flexibility, 100% infill for strength in the pocket flap joint, no supports or brim necessary (despite what the slicer might say about stability of such a tall print), 0.20 layer height, 0.4 nozzle. On my Ender 3v3SE, the pocket prints in about 3 hours, and the display panel in about 30 minutes (plus any time for you to swap out filament twice).
Assembly consists of gluing the display panel to the front of the pocket flap. I used super glue. If you want plain, skip printing the display panel file, it will still work as a pocket protector.
NOTE about license. This is derived from MY OWN original design which has a non-commercial use license. However, for this worthy cause, I am eliminating that, and making the design open to all.
Please donate to their charity if you like the print. This item is neither associated or endorsed by the organization.