1 / 3
Girl Scouts Magnetic Trefoil Badge — zdjęcie 1
1 / 3

Girl Scouts Magnetic Trefoil Badge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple wearable magnetic emblem for Girl Scouts. Also included is a blank trefoil template and logo files.

Ocena
5 / 5
Polubienia
20
Pobrania
263
Wydruki
1
Wyświetlenia
783
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Both the Front and Back files have 3 magnet holes that fit 10x2.3mm magnets.
Amazon link to magnets I used ($0.16 per magnet): https://a.co/d/c9TLRnq
Also, three 10x1mm magnets work as a substitute and are 44% cheaper.
They're $0.03 per magnet on Amazon (not an affiliate link): https://a.co/d/90j1NwF 

Be sure when slicing to insert a pause just before the holes are covered.

To get multi-colored results, import the pre-cut Front.3mf and assign preferred settings.
If using the Front.stl, cut ‘to pieces’ at a height of 3.2, then again at 3.901 to retain holes.
Then add a filament in the settings and assign it to the top layer. Print without support.

If resizing, be sure to either calculate for the new magnet size, or re-create the holes.
These have a diameter of 10.2mm and a height of 2.4mm for a 10x2.3mm magnet.

Text can be added on the underside and the back piece is reversible.
I used https://text-to-stl.kady3dprinting.com/ and a custom font to add underside text.
Import both .stl files into Tinkercad, rotate the text 180-degrees, align, and make it a hole.
Set the text height to 0.3mm unless you resize the trefoil and recreate the magnet holes.

Tagi