Bed Screw Lock for N4 Pro (2024 model) - updated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All other variants failed so i made mine
- Ocena
- 4,8 / 5
- Polubienia
- 55
- Pobrania
- 558
- Wydruki
- 4
- Wyświetlenia
- 1796
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Update 8.10.2024:
new slim variant that seats better to the counterpart, still holds and its much nicer to adjust the screws
I have bed with cutouts and its 7.5mm thick so every other variants of this part failed. Other problem is that almost every corner is a little bit different so i needed to anchor this part in other way bcs you want minimal play for decent repeatability. I used bracket that is same on all corners.
So if you have Neptune 4 PRO bought in 2024 with bed with cutouts that thicker than others, i got you.
For better installation experience(for your nerves), I recommend leaving your magnetic pad in place so it will hold the screws for you and remove it once everything is in place. Use bit and screw bolts from top, it goes much better.
For bottom part visit original post from original creator.