MCS Box Drive DMAG/HELIX Magazine Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a 3D printable MCS Box Drive Dmag Tower. I found the price to expensive for a piece of plastic so I made my…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 665
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Here is a 3D printable MCS Box Drive Dmag Tower. I found the price to expensive for a piece of plastic so I made my own.
I have not field tested jet. but it seems to feed well. and it looks in place well on a MCS Bolt and Hurricane. note that it's a bit of a tight fit
link video
Print Settings
Rafts:
Yes
Supports:
Yes
0.2mm
Infill:
40%
Notes:
it's best to print it this way for the strength.
but my test prints ware made in a more logical position. to save supports and the need for a raft. and I do have to say that is was surprisingly strong with just a wall thickness of 2. and a infill of 10% but reliable ? no.. I wouldn't push your luck haha
but the print will look better in a normal orientation so it's up to you.
Category: Sport & Outdoors