Tippmann TMC StG 44 shroud front Ironsight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Front iron sight is made for the TMC STG 44 shroud. https://www.thingiverse.com/thing:3786684 link to…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is the Front iron sight is made for the TMC STG 44 shroud.
https://www.thingiverse.com/thing:3786684
link to Video
link to barrel sizer tool video
_UPDATES__
13-10-2019
I have noticed that 7/8 barrels are not made the same... so it may no fit your barrel.
so print a small test part of it to test fit the barrel. and look what is the correct size for you
UPdate 31 07 2020--
a barrel sizer have been added just print this small part and you can make sure what size shroud is the best fit for your barrel
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.2
Infill:
40%
Filament:
Jupiter PETG
Notes:
shell: Wall line count: 4
At first did I had some trouble with the clamping mechanism, it would crush the infill layers.but this design is more flexible. so who knows, maybe is already works if you print every thing at a 40% infill. but if you want to be sure like I did. than make the place were the bolt and nut goes. a 100% infill area.
Post-Printing
1x M3 nut
1x M3 15mm bolt HEX
Category: Sport & Outdoors