Tippmann TMC Dual Mag Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These dual mag covers have the purpose of keeping dust, paint, rain ad sand out of your mags wile using Dual mags on…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 648
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
These dual mag covers have the purpose of keeping dust, paint, rain ad sand out of your mags wile using Dual mags on your TMC.
in combination with the Tippmann mag coupler by FiXeL666
https://www.thingiverse.com/thing:3065303
link to video
_UPDATES__
Downloads made after 11 August 2019 will have a extra file for the Right side. so it works for the StG 44 Shroud. it's called: TMC DM COVER Right M4 Knurled nut StG 44 edition
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
0,2mm
Infill:
40%
Filament:
Jupiter PETG
Notes:
shell: Wall line count: 4
the cover plate will not need any supports.note that you will get some noticeable stepping with a 0.4mm nozzle.
but personally did I not mind this.
the left side comes in 2 versions. one where you will need yo use a longer Tippmann bolt.
and one where you will use M4 knurled nut and a M4 30mm bolt + M4 washer
Post-Printing
make sure the cover plates can move freely and use 70mm long metal pins with a diameter of 1.5mm to attached this to the mounting parts.
Parts needed for the right side: 2x M4 Knurled, 2x M4 washers, 1x M4 40mm bolt, 1x M4 30mm bolt.
Parts for the Left side: 1 Tippmann bolt 25mm long.
or 1x M4 knurled, 1x M4 washer, 1x M4 30mm bolt.
Category: Sport & Outdoors