1 / 18
Tippmann TMC Dual Mag Winder or T15 mag — zdjęcie 1
1 / 18

Tippmann TMC Dual Mag Winder or T15 mag

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

there are more TMC magazine winders out there. but this one is made to work for a dual mag setup. link to…

Ocena
0 / 5
Polubienia
9
Pobrania
46
Wydruki
0
Wyświetlenia
963
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

there are more TMC magazine winders out there. but this one is made to work for a dual mag setup.

link to video

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Supports:

Yes

Resolution:

0.2mm

Infill:

40%

Filament: Jupiter PETG

Notes:

shell: Wall line count: 4

I'm not sure it the supports are really needed on the main part. but I used it. for the handles it won't be needed

Post-Printing

use the players to old the heated part to slide it over the Hex key and make it curve over the bend. so it will not slide out or bend later when using the winder. and of course try to keep it roughly in a straight 90 degree angle.

Note for when adding a cord to this winder.
use a stiff none flexible one, other wise it will get tangled during the winding process

and of course let the thread locker dry before using this winder.

Category: Sport & Outdoors

Tagi